Corsair headset, mouse and keyboard battery on Windows

Your Corsair headset, mouse or keyboard battery in the Windows taskbar, without iCUE: Void, Virtuoso, HS80 Max, Dark Core, Ironclaw and K57, 19 models.

19 models listed: 7 mice, 2 keyboards, 10 headsets

Headsets

The Void family (Void Wireless, Void Pro Wireless, Void RGB Elite Wireless) and the HS70 report a percentage, read the way the Linux kernel driver reads it. The Virtuoso RGB Wireless XT and SE report one too. The Wireless V2 generation (Void Wireless V2, Virtuoso Max, HS80 Max) gives its level to a tenth of a percent, rounded on the icon.

Mice and keyboards on Slipstream

Recent Corsair mice and keyboards (Ironclaw RGB Wireless, Ironclaw Wireless SE, Dark Core RGB Pro and Pro SE, Harpoon RGB Wireless, K57 RGB Wireless) use Corsair's Bragi protocol, on their Slipstream receiver or over the cable, and report a precise percentage. The Ironclaw Wireless SE has been confirmed on a real mouse, on the cable and on the receiver.

Older models (Dark Core RGB, Dark Core RGB SE, K63 Wireless) use an earlier protocol that only reports five levels: the icon moves in steps of 25 %.

Add a Corsair device

  1. 1

    Connect it

    Plug in the Slipstream receiver, the headset's dongle or the cable, and check that the device works.

  2. 2

    Scan for devices

    In the BatteryOnPC window, open the Devices tab and click Scan for devices.

  3. 3

    Add it

    Click Add. The device gets its own icon in the taskbar, tinted green, orange or red according to its level.

Corsair models BatteryOnPC reads

These are the models confirmed so far by a public source or by a real reading. A firmware or a hardware revision can still differ: if yours is not read, write to us and we will look into it with you.

Mice7

Connection: Wireless dongle

  • Ironclaw RGB Wireless
  • Ironclaw Wireless SE
  • Dark Core RGB Pro
  • Dark Core RGB Pro SE
  • Harpoon RGB Wireless
  • Dark Core RGB
  • Dark Core RGB SE

Keyboards2

Connection: Wireless dongle

  • K57 RGB Wireless
  • K63 Wireless

Headsets10

Connection: Wireless dongle

  • Void Wireless
  • Void Pro Wireless
  • Void RGB Elite Wireless
  • HS70 Wireless
  • HS70 Pro Wireless
  • Virtuoso RGB Wireless XT
  • Virtuoso RGB Wireless SE
  • Void Wireless V2
  • Virtuoso Max Wireless
  • HS80 Max Wireless

Questions about Corsair devices

Do I still need iCUE?
Not for the battery. Keep iCUE for lighting, profiles or firmware updates if you use them; BatteryOnPC reads the level on its own.
Why does my Dark Core RGB move in steps of 25 %?
The first Dark Core RGB and RGB SE, like the K63 Wireless, only report five battery levels. BatteryOnPC shows exactly what the device sends, without inventing a finer percentage.
Is the HS80 RGB Wireless supported?
It is not listed: no reliable source documents how it reports its battery, unlike the HS80 Max, which is covered. The same goes for the HS55 and HS65. Write to us with your exact model before you buy.

Keep every battery in sight

One icon per device in the taskbar, and an alert before it runs out. One-time purchase, no subscription.